The Powerwerks PW2X6BT is a 2x6" 2-way 200W all-in-one portable Bluetooth-enabled PA system designed to provide convenient signal mixing and amplification for musicians, vocalists, and presenters in clubs, special events, and small concert venues. 200W of amplification drive two 6" woofers and a 1" Neodymium compression driver to produce a frequency response of 80 Hz to 20 kHz. A 1/4" sub output allows easy connection to a dedicated subwoofer for additional low-frequency reinforcement.
The integrated 3-channel mixer features XLR, 3.5mm, and 1/4" inputs to accommodate signal from microphones, line sources, or non-Bluetooth devices. A built-in Bluetooth receiver enables wireless streaming of music from smartphones, tablets, and laptops. Charge your mobile devices via two USB Type-A ports on the rear panel.
Each channel offers controls for volume and 2-band equalization. Daisy-chain other Powerwerks PW units via XLR Powerlink input and output jacks. Transport between rooms and gigs is made simple courtesy of the side-mounted carry handle.
Amplifier Power Rating | 200 W Peak (at 4 Ohms) |
Impedance |
HF Driver | 1 x 1" / 25.4 mm Compression Driver |
LF Driver | 2 x 6" / 152.4 mm Woofer |
Magnet | HF Driver: Neodymium |
Crossover | 3 kHz |
EQ | 1 x HF Shelf at 10 kHz 1 x LF Shelf at 100 Hz |
Filters |
Frequency Response | System: 80 Hz to 20 kHz Subwoofer Output: 20 Hz to 150 Hz |
Maximum SPL | 117 dB |
Gain Range | Mic Input: +70 dB Line Input: +56 dB Aux Input: +42 dB |
SNR | Bluetooth: 94 dB |
Audio I/O | 1 x XLR 3-Pin Male Link Input 1 x 1/4" TS Subwoofer Output 2 x XLR 3-Pin Female Input 1 x XLR 3-Pin Female Link Input 2 x 1/4" TS Female Input 1 x 1/8" / 3.5 mm TRS Input |
Phantom Power | +15 V |
USB | 2 x USB Type-A |
Bluetooth | 3.0 + EDR |
Bluetooth Profiles | A2DP |
Bluetooth Power Class | 2 |
Transmitter Power | 2 dBm |
AC Input Power | 120 VAC, 60 Hz |
Power Consumption | 60 W (Typical) |
Construction Material | MDF |
Dimensions | 9.4 x 8.1 x 21.7" / 240 x 205 x 550 mm |
Weight | 22.5 lb / 10.2 kg |